Who Is Responsible for Providing PPE? A Compliance Visit That Cost Me $2,100 to Answer

2026-10-26 by Bulwark Specification Desk

The question that started it

The auditor asked it on a Tuesday morning in February, standing next to our welding bay with a clipboard he hadn't opened yet.

"Who provides the PPE for this team?"

I said, honestly, "we reimburse them." I thought that was the good answer. It sounded generous. It sounded flexible. It sounded like a company that trusts its people.

He wrote something down. Then he asked to see the hazard assessment, the receipts, and the training records. I had one of those three things, and it was the receipts.

That's how a routine insurance walkthrough turned into a four-month project and roughly $2,100 in stuff we ended up buying twice.

What my first assumption got wrong

I took over purchasing for a 120-person fabrication and warehouse operation in 2021. Office administrator, but somehow the PPE line item lived in my folder — probably because the previous person retired and nobody wanted to claim it.

When I first started ordering, I assumed PPE was basically office supplies with a different catalog. People ask, I order, it shows up. I had a spreadsheet with sizes, a plastic folder of receipts, and a one-page reimbursement form.

The reimbursement part felt fair. Guys wanted specific boots. They had brands they trusted — a lot of our crew had worn Keen work boots for years, some were on their second or third pair of the same model. Why would I force them into something else? They bought, we paid back up to a limit, everyone was happy.

That was the assumption I had to unlearn, and it took a guy with a clipboard to do it.

The part of the standard everyone quotes wrong

Here's what I got wrong, and I don't think I'm the only one.

OSHA's PPE standard, 29 CFR 1910.132(h), requires the employer to provide required PPE at no cost to the employee. Not a suggestion. Not satisfied by a reimbursement program. Reimbursement is a payment method — it's not a program.

You still owe the hazard assessment in 1910.132(d)(1). You still owe the communication of selection decisions. You still owe the training in 1910.132(f). Paying people back for boots doesn't touch any of that.

There's a carve-out at (h)(2) for non-specialty safety-toe footwear and non-specialty prescription safety eyewear — but only if the employer actually permits them to be worn off-site. That's the exception I'd been leaning on for four years without reading it properly.

And it didn't hold up. We had people wearing their own boots in an area with chemical splash hazards, and my reimbursement limit didn't come close to covering boots that meet that spec. Nobody complained, because nobody knew. That's the thing about a compliance gap — it's quiet until it isn't.

So: who is responsible for providing PPE? The employer. Every time. The employer can choose the brand, the supplier, the color, the budget. The obligation doesn't shift to the person wearing it.

Rebuilding it from the floor up

I spent about two days walking the floor with our maintenance lead and a notebook, area by area. This was probably the most useful thing I did all year, and it should have been step one back in 2021.

  • Welding bay: FR coveralls as the outer layer, plus leathers, plus the helmet. Fire-resistant or flame-retardant (both get shortened to "FR" and nobody agrees which is which).
  • Warehouse aisles and dock: high-visibility upper body. Class depends on whether they're near the dock after dark.
  • Chemical storage corner: gloves rated for the specific chemicals, not "chemical resistant gloves" off a shelf.
  • General floor: safety glasses under ANSI Z87.1, plus hearing protection in the two loud rooms.

Then I turned each area into a one-page spec: what's required, what standard it has to meet, how many sizes, how often it gets replaced.

The coverall mistake

Before I had all the specs sorted, I ordered 40 pairs of FR coveralls on what looked like a good quote. The sizing chart said a 42-inch chest was a large. Perfect, I thought. I ordered by chest size like I was ordering shirts.

Twelve people couldn't get a fit. A coverall isn't a shirt — it has to accommodate reaching overhead, crouching, bending. A large that fits your chest can be a large you can't work in.

We ate the restocking fee, paid return freight, and I got to explain a $900 hole in the budget. That's my rookie mistake for the year.

The other thing nobody told me: FR certification is tested on clean fabric. Coat those garments in oil or grease and the label doesn't change, but the protection does. Laundering is part of the spec, not an HR nicety.

High-vis isn't one thing

This one caught me. Two high-vis jackets look basically identical on a laptop screen. One is fine for a daytime yard. One is what you want at dusk near a moving forklift. The difference is how much visible fluorescent and retroreflective material the garment has, and the classes are defined under EN ISO 20471 in Europe and ANSI/ISEA 107 in the US.

Most buyers focus on price per jacket and miss the class entirely. The question everyone asks is "what's your best price?" The question they should ask is "what class is this, and where is it appropriate?"

We ended up splitting it. Standard high-vis baselayers for the indoor crew, higher-class portwest workwear jackets for the ones working the yard and the dock. Same supplier, different garment, different job.

Where I stopped trying to be a one-stop shop

Once I had the specs written down, I tried to consolidate as much as I could onto one supplier. Convenient, fewer invoices, one delivery schedule. And a lot of it worked — portwest fr workwear covered the welding side, the coveralls came from the same range once we sorted out fit samples, and the price landed inside our budget without much back and forth.

But when I asked their rep about prescription safety glasses with inserts, she said something that changed how I bought from her: "That's not our strength. You need an optician for inserts. What we have is the over-glasses version, and it fits most frames."

Honestly? That earned my trust for everything else on the order. A supplier who tells you where the edge is, is a supplier whose other claims you can probably take at face value. I'd rather work with someone who knows their limits than someone who says yes to everything.

Same logic applied to boots, which is the part I expected to be a fight. It wasn't. I set a spec — impact and compression ratings, slip resistance, the right toe cap — set a per-pair budget, and let people choose within it. Some picked from the Portwest range. Some stuck with their Keen work boots. A couple went with another brand entirely. Fit is individual, and I'm not going to win an argument with a guy's feet.

My job is the spec, not the brand on the tag.

What it cost, and what it actually saved

Ballpark numbers, because I don't have a clean apples-to-apples comparison:

FY2023 PPE spend was around $19,000, most of it boots and reorders. FY2024 came in at roughly $16,400 — and that year included FR coveralls we didn't have before, so the drop was bigger than it looks. The boot line alone probably fell by half once we stopped paying for the wrong thing twice.

The ordering time dropped too. I used to spend 30-40 minutes a week chasing receipts and matching them to people. Now it's two stock orders a year plus ad hoc requests, maybe 20 minutes a month. Our AP person stopped processing 15 reimbursement checks a month, which she mentioned to me twice in one week, which I took as a red flag that I should have fixed this years earlier.

The $2,100 in duplicate buys is real money and I'm not pretending it isn't. But it's a one-time cost against a process that was quietly leaking all year.

Four things I'd do differently

  1. Write the hazard assessment first, buy second. Two days of walking the floor would have saved me most of the $2,100.
  2. Stop calling reimbursement a program. If you're paying people back, you have an expense category with gaps in it. The obligation sits with the company either way.
  3. Treat fit as a specification. A coverall that doesn't fit gets worn open, rolled up, or left in a locker. Sample first, then order.
  4. Keep a specialist for the specialist stuff. I consolidated most of it and it worked. Prescription inserts still go to an optician. Boots are still a choice within a spec.

The auditor's question was the most useful thing that's happened to our PPE program in four years. It just cost me $2,100 to get the answer.

Bulwark Specification Desk

Technical notes for organizations comparing FR clothing, arc-rated garments, high-visibility workwear, and recurring distributor supply programs.